Valve

Piston valves are one form of valve used to control the flow of steam within a steam engine or locomotive. They control the admission of steam into the cylinders and its subsequent exhausting, enabling a locomotive to move under its own power.

valves:as per O.E. Specification materila use as E.N. 52, E.N. 56, Bi-matel and also S.S. valve guide: as per O.E. specification graded casting and brass casting.

Camfollower

Cam followers with axial sliding rings can accommodate somewhat heavier axial loads than those without axial sliding rings. Axial loads are induced when operating in an inclined or tilted position.

E.N. 19

Rocker Arms Rocker Shaft

A rocker arm (in the context of an internal combustion engine of automotive, marine, motorcycle and reciprocating aviation types) is an oscillating lever that conveys radial movement from the cam lobe into linear movement at the poppet valve to open it. One end is raised and lowered by a rotating lobe of the camshaft (either directly or via a tappet (lifter) and pushrod) while the other end acts on the valve stem. When the camshaft lobe raises the outside of the arm, the inside presses down on the valve stem, opening the valve. When the outside of the arm is permitted to return due to the camshafts rotation, the inside rises, allowing the valve spring to close the valve.

Rocker Arms: As per O.E. specification die-forged steel rocker shaft: as per O.E. spcification.

Valve Tapet

The term tappet is widely used in relation to internal combustion engines, but imprecisely. It is most commonly encountered as a maintenance task for overhead valve engines, that of 'adjusting the tappets'. This operation adjusts the overall clearance in the valve actuation system: typically 20 thousandths of an inch (0.5 mm). The name arises because it is the clearance of the tappets that is being adjusted, even though the adjustment is not made to the tappets themselves.

Valve Tappet: As per O.E. specification chiled cast:

Union Joint Cross

Universal Joint Cross offeredcan be made available in different sizes and metal options like stainless steel and others as per the specific working needs as required in particular processes. Some of the areas

Auto Parts

We are exporters and manufacturers of high precision replacement engine parts. Having an experience of more than 40 years.

Valve & Valve guide, Rocker Arm & Rocker Shaft, Valve Tappet, Valve Push Rod, Cam Follower, Chain Spocket, Cam Gear, Water Pump, Forge and Alloy Cast Precision Components